Apex - 1-800-730-apex Call Now
Locations : Corona, California - Fabrication Equipment List
Apex has a complete fabrication department consisting of a Programmable Saw, MIG, TIG and ARC Welding Machines, Pedestal Grinders, Oxy/Acetylene Torches, Carbon Arc Torches, and Flat Weld Tables, all supported by (2) ten ton overhead cranes. Following is a partial list of our fabrication equipment, with new equipment being added as required for specific programs:

QTY MANUFACTURERS EQUIPMENT TYPE & SPECIFICATIONS
1 Hydro Mechanic V-18A Vertical Band Saw capable of cutting all types of material 36" wide x 36" high x any length. The saw has a Mitsubishi based PLC 500 programmable control system capable of making cuts to within .010" at various angles "automatically" at pre-programmed values.
1 Metal Mizer Vertical Band Saw capable of cutting all types of material 24" wide x 24" high x any length.
6 Miller Synchrowave 300A Combination MIG, TIG and ARC machines capable of welding all types of material, including steel, stainless steel and aluminum.
6 Lincoln Combination TIG and ARC machines capable of welding all types of material, including steel, stainless steel and aluminum.
2 Miller Synchrowave Portable field weld machines which can be set up for MIG, TIG and ARC welding on all types of material, including steel, stainless steel and aluminum.
1 Aronson 360 Degree weld positioner, capable of rotating weldments up to 1000 pounds.
1 Nelson Stud Welder, capable of welding up to 3/8" threaded studs on to steel frames or panels.
1 Metal Muncher Combination Brake/Press for cutting or forming all types of plates up to 1/2" thick x 24".
2 Phoenix 1000 Watt weld rod electrode stabilizing ovens.
1 I.C.M. Sandblast Booth capable of sandblasting parts as large as 36" long x 36" wide x 48" high.
1 Apex Fully Enclosed Paint Spray Booth 12' x 24'.
1 Apex Hydraulic Press to 150 ton.
1 LOT Miscellaneous saws, pedestal grinders, belt sanders, pneumatic grinders, weld tables and hand tools of all types.

MACHINING EQUIPMENT:
Apex has a modern, fully equipped machine department consisting of a Large Floor Mill, CNC Machining Centers, Bridgeport Mills, Lathes, Surface Grinder, Drill Presses, Granite Surface Table and other miscellaneous machining equipment, all supported by (2) ten ton overhead cranes. CADD/CAM software includes Mastercam, CATIA, Pro-E, and Unigraphics. The following is a partial list of our current machining equipment, with new equipment being added as required for specific programs:

QTY MANUFACTURERS EQUIPMENT TYPE & SPECIFICATIONS
1 HAAS VF9 4-Axis CNC Machine Center capable of machining parts 84"(x) by 40"(y) by 30"(z). The machine has been retrofitted with a rotary table, Renishaw Inspection Probe and is Laser Calibrated.
2 HAAS VF4 4-Axis CNC Machine Center capable of machining parts 50"(x) by 20"(y) by 25"(z). The machine has been retrofitted with a rotary table, Renishaw Inspection Probe and is Laser Calibrated.
1 HAAS VF5 4-Axis CNC Machine Center capable of machining parts 50"(x) by 26"(y) by 25"(z).
1 Nicholas Correa FP-40 Full 5-Axis knuckle, 50 Horsepower 50" taper spindle capable of machining parts 196.8"(x) by 127.9"(y) by 39.3"(z).
1 Cincinnati Milicron 3-Axis CNC Mill with a machine envelope of 26"(x) by 50"(y) by 20"(z).
1 Mitsubishi Horizontal Boring Mill with a 3-Axis capability of 16 Feet (x) by 22 Feet (y) by 12 Feet (z). The machine has a rotary table and a 90 degree head for vertical machining.
1 Collet Horizontal Boring Mill with a 3-Axis capability of 4 Feet (x) by 8 Feet (y) by 3 Feet (z). The machine has a rotary table and a 90 degree head for vertical machining.
1 Boyar and Schultz Surface Grinder with a machine envelope of 12" (x) by 36" (z) travel.
1 Giddings and Lewis Radial Arm Drill capable of large drill diameters with an envelope of 60"(x) by 36"(y) by 36" (z).
3 Bridgeport Vertical Mills with Digital Readouts and a machine capacity of 9"(x) by 32"(y) by 18"(z).
1 Acra Vertical Mills with Digital Readouts and a machine capacity of 14"(x) by 58"(y) by 24"(z).
1 LeBlond Engine Lathe with Digital Readout and a capacity of 15" diameter by 12 Ft thru the throat.
1 Gwang Ju Namseon Engine Lathe with Digital Readout and a capacity of 18" diameter by 16 Ft thru the throat.
1 Apex 20" Rotary Sander.
1 LOT Miscellaneous drills, pedestal grinders, sharpeners, angle plates and hand tools of all types.

MISCELLANEOUS ASSEMBLY AND SHOP EQUIPMENT:
Apex has a full complement of assembly equipment consisting of tube bending, forming and flaring as well as various types of measuring equipment for pneumatic and hydraulic testing. The following is a partial list of our current assembly and shop equipment, with new equipment being added as required for specific programs:

QTY MANUFACTURERS EQUIPMENT TYPE & SPECIFICATIONS
2 Rigid
3 Leonard
3 Parker
2 Lakeland
1 Brobo
1 LOT
1 LOT Hedland Flow Meters calibrated from .4 - 200 GPM.
3 Apex Hydraulic Test Units 4 to 50 GPM and up to 10,000 psi.
3 SC Hydraulics Hi Pressure Pumps .04 GPM
4 Apex Hydraulic Flushing Carts to 3 micron for water and dirt contamination.
1 Upright Electric Scissor Lift - 26 ft. total lift.
CALL TODAY: 951-734-3417 or EMAIL: info@apexdt.com
CALIFORNIA LOCATION
1168 Sherborn Street • Corona, CA 92879
Phone: 951-734-3417 • Fax: 951-808-9969